Diffraction is the change in the directions and intensities of a group of sound waves after passing by an obstacle or through an aperture.

See also Acoustic Shadowing, Triplication Artifact and Duplication Artifact.

Digital systems use discrete numerical values or non-numeric symbols for input, processing, transmission, storage, or display rather than being composed of variable voltage, acoustic field or electromagnetic field.

See also Digital Imaging and Communications in Medicine and Analog to Digital Converter.

(DICOM) DICOM is the industry standard for transferral of radiologic images and other medical information between computers. Patterned after the Open System Interconnection of the International Standards Organization, DICOM enables digital communication between diagnostic and therapeutic equipment and systems from various manufacturers.
The DICOM 3.0 standard evolved from versions 1.0 (1985) and 2.0 (1988) of a standard developed by the American College of Radiology (ACR) and National Electrical Manufacturers Association (NEMA). To support the implementation and demonstration of DICOM 3.0, the RSNA Electronic Communications Committee began to work with the ACR-NEMA MedPacs ad hoc section in 1992.
Also Picture Archiving and Communication Systems (PACS), which are connected with the Radiology Information System (RIS), use commonly the DICOM standard for the transfer and storage of medical images.

See also Digitization.

(DAC) Part of the interface that converts digital numbers from the computer into analog (ordinary) voltages or currents. In ultrasound systems e.g., the high voltage transmit amplifiers that drive the transducers might be controlled by digital to analog converters (DACs) to shape the transmit pulses for better energy delivery to the transducer elements.

Process of conversion of continuous (analog) signals, such as the detected ultrasound or MRI signal (voltage), into numbers. This is carried out with an analog to digital converter.
There are two kinds of discretization involved: the voltage is only measured (sampled) at particular discrete times and only voltages within a particular range and separated by a particular minimum amount can be distinguished. Voltages beyond this range are said to exceed the dynamic range of the digitizer.