(HPD) Harmonic power Doppler is currently one of the most sensitive techniques for detecting ultrasound contrast agents. HPD works by transmitting multiple pulses toward the object to be imaged and detecting the pulse-to-pulse changes in the received echo signals.
Second harmonic bandbass filtering is applied to the received signals to exploit the non-linear behavior of scattering from bubbles (clutter). Harmonic power Doppler operates best at high output levels because of increased contrast destruction, and pulse amplitudes close to the maximum allowed are used much of the time.
With a high mechanical index, non-linear propagation of the sound will cause significant harmonic components from tissue, and the contrast agent to tissue ratio will decrease.
Also called Harmonic Power Angio. See also Multiple Frame Trigger.

(I) The intensity of a wave is the rate of power through a unit region perpendicular to the direction of propagation. The unit of intensity is watts per square meter (W/cm2).

A longitudinal wave is a waveform in which the particle motion is parallel to the direction of the wave travel. Sound propagates as longitudinal waves. A series of longitudinal waves make up the ultrasound beam.
A longitudinal wave is produced when a piezoelectric ceramic in an ultrasound transducer, transmits it's back and forth oscillation into a continuous, elastic medium. The particles of the medium are made to oscillate in the direction of the wave propagation, but are otherwise stationary.

The near field (also called Fresnel zone) is the proximal part of an ultrasound beam. The Fresnel zone is adjacent to the transducer surface and has a converging sound beam profile. A narrow beam shape is maintained in the near field owing to constructive and destructive interference patterns of sound wavelets emitted from the transducer crystal.
The length of the near field is equal to
r²/l = d²/4l
where r is the radius, l is the ultrasound wavelength in the medium of propagation and d the diameter of the piezoelectric crystal.

See also Beam Pattern, and Sonographic Features.

Pressure is the force per unit area applied on a surface in a direction perpendicular to that surface.
Pressure can also be described as a form of potential energy in a fluid. The maximum pressure of the fluid medium obtained during propagation of an ultrasonic pulse.
The negative peak pressure is the peak rarefaction pressure attained during the negative portion of a propagating ultrasound pulse in a medium such as tissue.
Sound pressure can be measured using a microphone in air and a hydrophone in water. The SI unit for sound pressure is the Pascal.
Blood pressure is the pressure exerted by the blood on the walls of the blood vessels.

See also Rarefactional Pressure, Low Intensity Pulsed Ultrasound, and Projector.